 |
||
|
Toll
Free: 1-888-731-8882
|
||
|
|
Kelln Solar Water Pumping Kelln Solar Water Pumping is Canada's largest manufacturer of Solar Water Pumping Systems with capabilities of pumping from 5 feet to 600 feet. Kelln Surface pumps include our Floating, Centrifugal, Rotary vane, and Piston pumps. Well pumps include our Diaphragm, Piston, Centrifugal, and Rotary vane pumps. Quality products, customer satisfaction and energy conservation are the backbone on which Kelln Solar strives to meet its customer needs. Kelln Solar Water Pumping has been providing Solar Pumping solutions for the last 15 years. The Kelln Solar Water Pump selection is detailed in the following table. Choose the link to the pump with the characteristics you require for a description of the pump and its typical applications. Brochures are available as PDF files for many of our most popular pumping systems. You will find links to these in the pump system descriptions too.
For information about the advantages of pumping water for livestock, see our Technical Information page. To receive a quote for a system ideal for your application, see our Pump Sizing Request Form.
Applications: Bored wells, dugouts, lakes or any surface
water. The Kelln Solar Floating Pump is a one stage centrifugal pump with a permanent magnet, stainless steel shaft and continuous duty motor. Portability and efficiency best describe the operation of this pump. The float pump is self priming and does not have a check valve which makes it an excellent choice for early spring or late fall applications because the water drains back to water source. This pump may
be used to float on dugouts, surface water or weighted down in a
well situation. In a typical application, it pumps 12 GPM @ 8 feet.
There are seven different pumping models that are capable of watering
up to 500 cow/calf pairs.
Brochures showing
example systems with installation diagrams are available as PDF
files:
K2 Float Pump Applications:
Bored wells, dugouts, lakes or any surface water. The Kelln K2 Floating Pump is a continuous duty magnetic drive centrifugal pump magnetically coupled to a permanent DC magnet motor. The pump head is made of corossion resistant polymers. All these features produce unsurpassed durability and provide years of trouble free service. In a typical application, this pump moves 15 GPM @ 20 feet. The pump drains back to water source which is ideal for early spring and late fall applications to prevent freeze ups.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the K2 Float pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart . Brochures showing
example systems with installation diagrams are available as PDF
files:
Kelln Solar High Volume Floating Pump Applications:
Bored wells, dugouts, lakes or any surface water. The Kelln Solar High Volume Floating Pump is a continuous duty centrifugal pump powered by a 1 HP, stainless steel shaft and permanent DC magnet motor. The pump head is made of stainless with a stainless steel impeller. All these features produce unsurpassed durability and provide years of trouble free service. In a typical
application, this pump moves 25 GPM @ 25 feet. The pump drains back
to water source which is ideal for early spring and late fall applications
to prevent freeze ups.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the High Volume Float pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All High Volume Floating Systems Include:
Kelln Solar Fast Pump Applications:
Bored wells, dugouts, lakes, or surface water
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the Fast pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Fast Pump Systems Include:
Kelln Solar Diaphragm Pump Applications:
Bored wells, dugouts, lakes or any surface water This positive displacement pump is coupled to a permanent magnet, direct current, ball bearing continuous duty rated motor. This pump will pump up to 3 gallons a minute and may be used for dugouts, rivers, surface water or hung down wells a few feet above water level. The diaphragm pump will self prime up to 7 feet and has a built in pressure switch or may operated from an external float switch. The Kelln Solar Diaphragm Pump has a check valve which will require pump to have freeze protection for early spring and late fall applications. Care must be taken to ensure that this pump does not run dry.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the Diaphragm pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Diaphragm Systems Include:
Kelln Solar Solar Direct or Battery Roto Pump Applications:
Wells, dugouts, lakes or any surface water The Roto
pump is a rotary vane, positive displacement pump, which delivers
up to 200 gallons per hour. Quiet operation that requires no lubrication
or maintenance during the life of the pump makes it very dependable.
The pump is self-priming to twenty feet with lifts of up to 400'
and capable of transferring water up to a mile. These pumps may
be used for dugouts, sand points, surface water or hung down wells
just above the water source. This pump is fully serviceable and
carries a 2-year warranty.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the Roto pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Battery Roto Systems Include:
All Solar Direct Roto Systems Include:
Kelln Solar Model 9300 Pump Applications:
Wells, dugouts, lakes The 9300 submersible pump is backed by 25 years of research and engineering experience with features like corrosion proof housing with stainless fasteners, run dry protection, strong lightweight construction and state of the art solid diaphragm. The 9300 also has a gland connector which features a water blocked connector, impervious gland connection design which prevents water wicking, quick disconnect (no splicing necessary) and accepts a variety of jacketed cables. In a typical
application, this pump moves 1.5 GPM. The pump is lightweight -
only 6 pounds - and will fit in a 4" well casing.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the 9300 submersible pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Submersible 9300 Systems Include:
Kelln
Solar Piston (Transfer) Pump
The Kelln Solar Piston Pump is a double action, single piston pump featuring safety valve, low surge starting current, excellent efficiency, 20 year life expectancy, the ability to pump particles in water and it self primes to 25 vertical feet. In a typical application, it will pump 4 to 7 GPM. The Kelln Solar
Piston Pump (P3) may be used in shallow wells, dugouts, rivers and
lakes or from holding tanks. The P3 is excellent for transferring
water over long distances for home, village, irrigation or livestock
usage. The piston pump may be used to transfer water to different
parts of your pasture, enabling better pasture utilization. Pumps
are available in 24 VDC and regular AC power supply. Larger piston
pump systems are also available with wind generators and solar panels.
Please call for details.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the P3-600 Piston pump is suitable for. It also contains information about the flow rates achieved with this pump. For capacity information, see the Performance Chart. Charts are also available for Application guidelines and Performance on the P3-275 Piston pump. Brochures showing
example systems with installation diagrams are available as PDF
files: All Piston Systems Include:
Kelln Solar ETAPUMPTM Applications:
Wells, Dugouts, Lakes or Rivers This positive displacement pump is comprised of a rotor and stator coupled to a brushless DC Motor. The pump is not appropriate for applications where it may run dry because the water acts as the lubricant. The rotor is a hard chrome plated bar with a rubber stator engineered to allow abrasive particles (like sand) to pass through the pump without harm, increasing pump life. The pump is driven by a brushless DC motor complete with rare earth magnets and mounted in a stainless steel casing. The pump fits in a 4" well casing. Typical pumping rates are 1.5-10 GPM.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the various ETAPUMPTM models are suitable for. It also contains information about the flow rates achieved with these pumps. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Battery Operated HR Systems Include:
All Solar Direct HR Systems Include:
Kelln Solar Centric Submersible Pump Applications:
Wells, Dugouts, Lakes or Rivers This is a centrifugal pump which is comprised of a custom made stacked centrifugal pump head coupled to a brushless DC Motor. Care should be taken to ensure this pump does not run dry because the water lubricates and cools the bushings. The motor is a brushless DC model complete with rare earth magnets mounted in a stainless steel, water filled casing. The pump fits in a 4" well casing. Typical pumping rates are 3.7- 12.1 GPM.
The Applications Chart provides a guideline indicating the number of Cow/Calf Pairs the Centric Submersible pump systems are suitable for. It also contains information about the flow rates achieved with these pumps. For capacity information, see the Performance Chart. Brochures showing
example systems with installation diagrams are available as PDF
files: All Centric Submersible Systems Include:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Kelln
Consulting Ltd.
Kelln Solar P.O. Box 94, 50 James St. Lumsden, Saskatchewan, Canada S0G 3C0 |
||
|